Start your PlanktoScope

Step 1 : Plug it properly

  1. Plug the GPS

  2. Plug the Jack Barrel (12V - 1A)

  3. Plug the RPi (5V - 3A)

Step 2 : Check the LEDs

  1. Green LEDs of the Stepper HAT

  2. Blinking LED of the GPS

  3. Green LEDs of the Fan HAT

  4. White LED of the illumination

Step 3 : Connect to the WiFi

SSID : PlanktonScope_copepode

Password : copepode

Step 4 : Get to the GUI

Back-End : http://192.168.4.1:1880/

Front-End : http://192.168.4.1:1880/ui/

Step 5 : Test main functions

Visibility of the Pi Camera stream

Move the focus

Move the pump

Step 6 : Get your data

Host : 192.168.4.1

Protocol : SFTP

User : pi

Password : copepode